Intercom Features
46
Document Version 2012-01
Note:
L
If the other handset user does not answer the
call within 1 minute, the call rings at your
handset again.
Answering a transferred call
Press
{C}
to answer the page.
Note:
L
After the paging party disconnects, you can talk
to the outside caller.
Intercom features between
the handset and base unit
(KX-TGP550 only)
Intercom
Intercom calls can be made between the handset
and base unit.
Note:
L
If you receive an outside call while talking on the
intercom, you hear interrupt tones (page 28, 34).
– To answer the call with the handset, press
{
OFF
}
, then press
{C}
.
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
{
SP-PHONE
}
2 times.
L
When paging the handset, the paged handset
beeps for 1 minute.
Making an intercom call
1
{
MENU
}
(center of joystick)
2
{V}
/
{^}
:
“
Intercom
”
i
{
SELECT
}
3
{V}
/
{^}
: Select the desired unit.
i
{
CALL
}
L
To stop paging, press
{
OFF
}
.
4
When you finish talking, press
{
OFF
}
.
1
Press
{
j
}
–
{
k
}
or
{
ALL
}
.
L
Lift the corded handset if needed.
L
To stop paging, press the same button.
2
When you finish talking, press
{
SP-PHONE
}
or place the corded handset on the cradle.
Answering an intercom call
1
Press
{C}
to answer the page.
2
When you finish talking, press
{
OFF
}
.
1
Lift the corded handset or press
{
SP-PHONE
}
to answer the page.
2
When you finish talking, place the corded
handset on the cradle or press
{
SP-PHONE
}
.
Answering an intercom call using auto
intercom
Before using the auto intercom, turn auto intercom
on (page 45).
1
When you are paged by the base unit, speak
into the microphone.
L
To switch to the receiver, press
{C}
.
2
To end the intercom, press
{
OFF
}
.
Monitoring audio in a room using auto
intercom
You can listen to the sound in a room where the
handset is located using the auto intercom.
Important:
L
Before using this feature, set auto intercom on
the destination handset to
“
On (Ringer
Off)
”
to allow access by the base unit.
1
Call the destination handset (page 46).
L
You can listen to the audio.
2
To mute your sound output, press
{
MUTE
}
if
necessary.
3
To stop monitoring, press
{
SP-PHONE
}
or
place the corded handset on the cradle.
Y
Handset
:
Base unit
Y
Handset
:
Base unit
Y
Handset
:
Base unit
