deactivated permanently or temporarily.
Alternatively you can leave this service
connected and change the
“
Ring count
”
to a shorter duration on your unit so your
unit’s answering machine can pick up the
call prior to the service provided by your
phone service provider.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is
“
3 min
”
.
1
M
MENU
N#305
2
MbN
: Select the desired setting.
a
M
SAVE
N
a
M
OFF
N
Selecting “
Greeting only
”
You can select
“
Greeting only
”
which sets
the unit to announce a greeting message to
callers but not record messages.
Select
“
Greeting only
”
in step 2 on
“Caller’s recording time”, page 57.
Note:
R
When you select
“
Greeting only
”
:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 51).
57
Answering System
0605_TGM42xAZ OI_ver002.pdf 57
5/6/2016 5:01:41 PM
