Making landline calls
1
Lift the handset and then dial the phone
number.
R
To correct a digit, press
M
CLEAR
N
.
2
Press
M
TALK
N
to make the call.
R
To make the call using the
speakerphone, press
MZN
.
3
When you finish talking, press
M
OFF
N
or
place the handset on the base unit or
charger.
Note:
R
While talking, you can switch between the
receiver and the speakerphone by pressing
MZN
.
R
In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding
MFN
W
for a few seconds.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN
REDIAL
2
MbN
: Select the desired entry.
3
M
TALK
N
Pause (for PBX/long
distance service users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 49).
Example:
If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
9
a
MDN
(Pause)
2
Dial the phone number.
a
M
TALK
N
Note:
R
A 3.5 second pause is inserted each time
you press
MDN
(Pause) on the handset.
Answering calls
Using the handset
When a call is being received, the message
indicator flashes rapidly if the handset
message indicator’s
“
Incoming call
”
setting is enabled (page 31).
1
Lift the handset and then press
M
TALK
N
or
MZN
when the unit rings.
R
To answer a cellular call, you can also
press
M
CELL
N
.
2
When you finish talking, press
M
OFF
N
or
place the handset on the base unit or
charger.
Any key answer:
You can answer the call by
pressing any dial key (
1
to
9
,
*
, or
#
).
Auto talk:
You can answer calls simply by
lifting the handset (page 58).
Temporary handset ringer off:
You can turn
the ringer off temporarily by pressing
M
N
(left
soft key).
Using the base unit
When a landline call is being received, the
SP-PHONE indicator (
Z
) flashes rapidly.
When a cellular call is being received, the
CELL indicator and SP-PHONE indicator (
Z
)
flash rapidly.
Additionally, the message indicator flashes
rapidly if the base unit message indicator’s
“
Incoming call
”
setting is enabled
(page 31).
1
Press
MZN
when the unit rings.
R
You can also answer the cellular call
by pressing
M
CELL 1
N
or
M
CELL 2
N
.
2
Speak into the microphone.
3
When you finish talking, press
MZN
.
Note:
R
While on a call, you can switch from the
base unit to the handset:
– Press
M
TALK
N
on the handset, then
press
MZN
on the base unit with the call
sharing mode on (page 59).
– If the handset is on the base unit, simply
lift it.
For assistance, please visit http://shop.panasonic.com/support
39
Making/Answering Calls
TGM43x(en)_0426_ver031.pdf 39
2016/04/26 10:55:18
