*3 When the mobile line only mode is turned on, these menus are not displayed (page 18).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For MOBILE 1
*6 For MOBILE 2
*7 The preset melodies in this product (
“
Tone 3
”
-
“
Melody 10
”
) are used with permission of
© 2009 Copyrights Vision Inc.
*8 The preset melodies in this product (
“
Tone 1
”
and
“
Tone 2
”
) are used with permission of
© 2013 Copyrights Vision Inc.
*9 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
. (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*10 If you subscribe to a distinctive ring service, select a tone. If you select a melody, you cannot
distinguish lines by their ringers.
*11 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select
“
On
”
, the tone sounds 2 times.
*12 This setting is available when you have the key finder (KX-TGA20AZ). Read the installation
manual for more information on the key finder.
*13 For models with supplied key finders, the display shows “
1:
Finder1
”.
*14 If you register 2 or more key finders.
*15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*16 The recall time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*17 The default setting will be as follows if you select the following regional code when changing
the unit’s region setting (page 51):
“
NewZealand
”
=
“
600 ms
”
*18 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to
“
A
”
if telephone line condition is not good.
*19 This setting is available when a mobile phone is paired.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Make sure the unit’s date and time setting
is correct (page 15).
Handset
1
M
MENU
N#720
2
MbN
: Select the desired alarm.
a
M
SELECT
N
3
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns alarm off. Go to step 10.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 5.
47
Programming
TGF372AZ(en)_0519_ver003.pdf 47
2015/05/19 9:28:45