*1 If you program these settings using one of the units, you do not need to program the same item using
another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select
“
Caller ID auto
”
. To turn this feature off, select
“
Manual
”
. (Caller
ID subscribers only)
To use this feature, set the date and time first (page 14).
*4 The preset melodies in this product (
“
Tone 3
”
-
“
Melody 10
”
) are used with permission of © 2009
Copyrights Vision Inc.
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or 2). If
you select a melody, you cannot distinguish lines by their ringers.
*6 This setting is available when you have the key detector (KX-TGA20). Read the installation manual
for more information on the key detector.
*7 For models with supplied key detectors, the display shows
“
1:Detector1
”
.
*8 If you register 2 or more key detectors.
*9 Handset
*10 Base unit
*11 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the
handset to answer a call, turn off this feature.
*12 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary. The setting should stay at
“
700 ms
”
unless pressing
M
FLASH
N
fails to pick up the
waiting call.
*13 Generally, the line mode setting should not be changed. This setting automatically maintains receiver
volume at the proper level depending on the current telephone line condition. Set the line mode to
“
A
”
if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 1 minute and
is repeated 5 times at 5 minute intervals (snooze
function). A text memo can also be displayed for
the alarm. A total of 3 separate alarm times can be
programmed for each handset. You can set one of
3 different alarm options (once, daily, or weekly)
for each alarm time.
Important:
R
Make sure the unit’s date and time setting is
correct (page 14).
Handset
1
M
MENU
N#720
2
MbN
: Select the desired alarm.
a
M
SELECT
N
3
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns alarm off. Go to step 10.
“
Once
”
An alarm sounds once at the
set time.
“
Daily
”
An alarm sounds daily at the set
time. Go to step 5.
“
Weekly
”
Alarm sounds weekly at the set
time(s).
4
Proceed with the operation according to your
selection in step 3.
n
Once:
Enter the desired month and date.
a
M
OK
N
n
Weekly:
MbN
: Select the desired day of the week and
press
M
SELECT
N
.
a
M
OK
N
5
Set the desired time.
6
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
7
Enter a text memo (10 characters max.).
a
M
OK
N
For assistance, please visit http://shop.panasonic.com/support
33
Programming
TGF35x(en)_0303_ver101.pdf 33
2016/03/03 12:12:51
