Panasonic KX-TGEA20 Operating Instructions Manual Download Page 23

Page: 23 / 68

When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.

When you finish talking, press

OFF

When 2 or more handsets are registered:

You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.

Note:

The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.

Making a call using the redial list

When only 1 handset is registered:

Lift the handset.

MEN

REDIAL

MbN

: Select the desired phone number.

Within 1 minute, place the handset on
the base unit.

Wait until speakerphone is turned
on automatically and the call is
made.

When 2 or more handsets are registered:

You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.

Making a call using the phonebook

There must be at least 2 handsets
registered to the base unit in order for the
phonebook feature to be used during a
power failure.

You should leave one handset on the base
unit for supplying the power, and use another
handset for making calls.

Answering calls during a power
failure

When only 1 handset is registered:

When the unit rings, keep the handset
on the base unit and press

MZN

Speakerphone is turned on.

When you finish talking, press

OFF

When 2 or more handsets are registered:

When the unit rings, use a handset which is
not supplying power to the base unit.

Do not use or lift the handset which is
placed on the base unit during power
back-up mode.

Note:

The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.

For assistance, please visit http://www.panasonic.com/help

Making/Answering Calls

TGE21x23x24x(en)_1122_ver031.pdf23 23

2013/11/22 14:22:28

Summary of Contents for KX-TGEA20





































































Search results

Summary of Contents for KX-TGEA20

Reviews:

Related manuals for KX-TGEA20

Brands by name

Popular brands

Panasonic KX-TGEA20, Operating Instructions Manual

Search results

Summary of Contents for KX-TGEA20

Reviews:

Related manuals for KX-TGEA20

Brands by name

Popular brands