Making an intercom call
Handset
1
M
MENU
N
a
MbN
:
“
Intercom
”
a
M
SELECT
N
2
MbN
: Select the desired unit.
a
M
SELECT
N
3
When you finish talking, press
M
OFF
N
.
Note:
R
You can also use the
M
INT
N
soft key, if
displayed, to make intercom calls.
Base unit
*1 KX-TGE240 series: page 3
1
Press
M
INTERCOM
N
.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press
0
or wait
for a few seconds.
R
To stop paging, press
M
INTERCOM
N
.
2
When you finish talking, press
M
INTERCOM
N
.
Answering an intercom call
Handset
1
Press
M
N
to answer the page.
2
When you finish talking, press
M
OFF
N
.
Base unit
*1 KX-TGE240 series: page 3
1
Press
M
INTERCOM
N
to answer the page.
2
When you finish talking, press
M
INTERCOM
N
.
Using the Smart function key
Press
M
N
to answer the page.
Power back-up operation
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. However, some
functions such as Caller ID and phonebook
are available only when using a handset other
than the handset supplying power to the base
unit. You can program
“
Power failure
”
and the default setting is
“
Auto
”
Important:
R
If a handset is not placed on the base unit
when a power failure occurs,
“
Base no
power Press OFF
”
is displayed. After
pressing
M
OFF
N
on the handset, place it on
the base unit to start power back-up mode.
R
Power back-up mode will not work if the
battery level of the power supplying
handset is or .
R
Do not lift the power supplying handset
from the base unit during power back-up
mode.
Panasonic Ni-MH battery
performance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on usage.
– Continuous use of the handset in power
back-up mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power back-up mode: 2 hours
max.
– Not in use in power back-up mode: 2 hours
max.
Making calls during a power
failure
n
When only 1 handset is registered:
1
Lift the handset and dial the phone
number.
2
Within 1 minute, place the handset on
the base unit.
R
Wait until speakerphone is turned
on automatically and the call is
made.
22
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
TGE21x23x24x(en)_1122_ver031.pdf22 22
2013/11/22 14:22:27
