Panasonic KX-TGD890 Operating Instructions Manual Download Page 62 | Manualshive

Page: 62 / 84

Panasonic KX-TGD890 Operating Instructions Manual Download Page 62

Making/answering calls, intercom

Problem

Cause/solution

is displayed.

R

The handset is too far from the base unit. Move closer.

R

The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.

R

The handset is not registered to the base unit. Register it
(page 45).

Noise is heard, sound cuts in
and out.

R

You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.

R

Move closer to the base unit.

R

If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.

The handset or base unit does
not ring.

R

The ringer volume is turned off. Adjust the ringer volume
(page 21, 38).

R

Silent mode is turned on. Turn it off (page 43).

R

The ringer volume is turned off by pressing and holding

0

(

). Press and hold

0

(

) again to turn it on

I cannot make a call.

R

The dialing mode may be set incorrectly. Change the
setting (page 16).

I cannot answer an incoming
call using voice commands.

R

The answer by voice command feature is turned off. To
turn it on, see page 25.

R

Baby monitor is set to

“

On

”

. Turn off the baby monitor

feature (page 44).

The unit answers an incoming
call on its own.

R

This situation might happen due to a false detection of
ambient noise (dog barking, TV sound, etc.). Move the
unit further away from the noise sources.

R

If you are using other telephone that has Talking Caller ID
feature turned on, it may also trigger false detection. Turn
the Talking Caller ID feature off on the other telephone.

R

To minimize false detection, decrease the sensitivity level
of the answer by voice command (page 25, 40).

I cannot make long distance
calls.

R

Make sure that you have long distance service.

I cannot use voice paging.

R

You cannot use voice paging if other units are in use.

62

For assistance, please visit http://shop.panasonic.com/support

Useful Information

KX-TGD890_892_(en-us)_0713_ver310.pdf 62

7/14/2022 10:42:31 AM

«
...
60
61
62
63
64
...
»

Summary of Contents for KX-TGD890





















































































Reviews:

No comments