Panasonic KX-TGC212LAB Service Manual Download Page 2 | Manualshive

Page: 2 / 89

background image

2

KX-TGC210LAB/KX-TGC212LAB/KX-TGC213LAB/KX-TGC220LAB/KX-TGC222LAB/KX-TGC223LAB/KX-TGCA20LAB

WARNING

This service information is designed for experienced repair technicians only and is not designed for use by the general
public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting
to service a product. Products powered by electricity should be serviced or repaired only by experienced professional
technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone
else could result in serious injury or death.

IMPORTANT SAFETY NOTICE

There are special components used in this equipment which are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that
these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.
Do not modify the original design without permission of manufacturer.

IMPORTANT INFORMATION ABOUT LEAD FREE, (PbF), SOLDERING

If lead free solder was used in the manufacture of this product, the printed circuit boards will be marked PbF.
Standard leaded, (Pb), solder can be used as usual on boards without the PbF mark.
When this mark does appear, please read and follow the special instructions described in this manual on the
use of PbF and how it might be permissible to use Pb solder during service and repair work.

L

When you note the serial number, write down all 11 digits. The serial number may be found on the bottom of the unit.

L

The illustrations in this Service Manual may vary slightly from the actual product.

«
1
2
3
4
...
»

Summary of Contents for KX-TGC212LAB


























































































Reviews:

No comments

Related manuals for KX-TGC212LAB

Brand: Olympia Pages: 40

Brand: Panasonic Pages: 252

Brand: Panasonic Pages: 8

Yealink SIP-T22P

Brand: Yealink Pages: 2

Brand: Yealink Pages: 3

Brand: Panasonic Pages: 10

Brand: Uniden Pages: 42

Brand: VTech Pages: 16

Brand: Kogan Pages: 8

Brand: BellSouth Pages: 33

Brand: Neon Pages: 44

Brand: DAINCUBE Pages: 35

Brand: GAI-Tronics Pages: 16

Brand: Makita Pages: 24

Brand: Makita Pages: 32

Brand: Makita Pages: 52

Brand: fonality Pages: 2

Brand: Panasonic Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands