Charge for about 7 hours.
R
When the batteries are fully charged,
“
Fully charged
”
is displayed.
Rechargeable Ni-MH
ONLY
Confirm
“
Charging
”
is displayed.
Note:
R
The handset display may show
“
Please wait for 1 minute.
”
when the
handset is placed on the charger if it is not registered to the base unit.
R
If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
,
) and the charge contacts with a dry cloth and
charge again.
R
To maximise battery life, it is recommended that the handset batteries be fully
discharged (used) until
flashes once every few months.
Display language
1
M
N#110
2
MbN
: Select your desired language.
a
M
OK
N
a
MeN
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
MeN
for
few seconds to turn the handset on.
1
Handset:
Lift the handset and press
MeN
.
2
Base unit:
Press and hold
M
N
for about 5 seconds.
R
Depending on the base unit, a registration tone sounds.
R
If all registered handsets start ringing, press
M
N
again to stop, then repeat
this step.
4
Installation
TGA681HK(en-en)_0507_ver002.pdf 4
2013/05/07 17:52:13
