– 6 –
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{i
c
}
for few seconds to turn the handset on.
1
Handset:
Lift the handset and press
{i
c
}
.
2
Base unit:
Proceed with the operation for your model.
3
Handset:
Place the handset on the base unit.
L
Continue the operation even when the handset display shows
“
Please wait for 1 minute.
”
.
4
With the handset still on the base unit, wait until a confirmation tone
sounds and
w
stops flashing.
Note:
L
If an error tone sounds, or if
w
is still flashing, register the handset
according to the base unit’s operating instructions.
L
When you register the handset to your base unit, some features may
be unavailable.
L
The KX-TG7301/KX-TG8301/KX-TG6411/KX-TG8411 does not
feature an answering system.
L
Answering system features are available only when this handset is
registered to the KX-TG7321/KX-TG7341/KX-TG8321/KX-TG6421/
KX-TG6461/KX-TG6481.
N
KX-TG7301/KX-TG8301/KX-TG6411/KX-TG8411
Press and hold
{x}
for about 5 seconds. (No registration tone)
N
KX-TG7321/KX-TG7341/KX-TG8321/KX-TG6421/KX-TG6461/
KX-TG6481
Press and hold
{x}
for about 5 seconds, until the registration tone
sounds.
L
If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
TGA648AZ(e).fm Page 6 Tuesday, July 7, 2009 4:05 PM
