Panasonic KX-TGA641FXT Service Manual Download Page 34

Page: 34 / 105

KX-TG6421HGT/KX-TGA641FXT

8.3.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase recorded Voice messages*, stored Phone numbers, Caller list
and etc.)

Note:

• Some menus are not reset. Refer to

Operating Instructions

(P.19).

• The reset menus differ depending on the following operations.
•

This operation should not be performed for a usual repair.

* KX-TG6421 only

8.3.1.

Resetting both base unit and handset

Both the base unit and the registered handset which you did the following steps

are reset. Other registered handsets

will not be reset.

Note:

(*1) Refer to

Registering a Handset to a Base Unit

(P.21).

8.3.2.

Resetting only handset

The only handset is reset by doing the following steps

Note:

(*2)

• The handset registration to the base unit is cancelled.
• If the handset needs to be registered to the base unit, refer to

Registering a Handset to a Base Unit

(P.21).

• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.

Summary of Contents for KX-TGA641FXT










































































































Search results

Summary of Contents for KX-TGA641FXT

Reviews:

Related manuals for KX-TGA641FXT

Brands by name

Popular brands

Panasonic KX-TGA641FXT, Service Manual

Search results

Summary of Contents for KX-TGA641FXT

Reviews:

Related manuals for KX-TGA641FXT

Brands by name

Popular brands