(4)
Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
3
Extensor de alcance: Mantenga presionado
{
PROGRAM
}
durante
aproximadamente 3 segundos para ingresar en el modo de registro.
L
Cuando la unidad se encuentre en el modo de registro, el indicador de ESTADO
parpadeará de color verde.
4
Extensor de alcance: Suelte
{
PROGRAM
}
.
L
El indicador de ESTADO continúa parpadeando de color verde durante el
registro.
L
Después de que se complete el registro, el indicador de ESTADO y el indicador
w
se encenderán de color ámbar durante 2 segundos. A continuación, el
indicador de ESTADO se encenderá de color rojo, mientras que el indicador
w
parpadeará de color rojo antes de que se complete el registro.
5
Extensor de alcance: Confirme que el indicador de ESTADO y el indicador
de
w
se iluminen en verde (la unidad está lista para usarse).
L
Si los indicadores no se iluminan en verde, reposicione la unidad en un lugar
donde lo hagan.
6
Unidad base: Para salir del modo de registro, oprima
{
LOCATOR
}
.
L
Según la unidad base, regresará automáticamente al modo de espera luego de
que se complete el registro.
Nota:
L
El adaptador de CA debe permanecer conectado todo el tiempo. (Es normal que el
adaptador se caliente durante su uso.)
L
El adaptador de CA debe estar conectado a un enchufe de corriente orientado
verticalmente o en una toma de corriente alterna colocada en el piso. No conecte
el adaptador de corriente a una toma de corriente con orientación horizontal que
mire hacia abajo, como una toma de corriente instalada en el techo o bajo una
mesa, ya que el peso del adaptador puede hacer que se desconecte.
L
La unidad puede soportar un máximo de 2 auriculares a la vez.
L
Se pueden registrar hasta 2 extensores de alcance en la unidad base.
Cómo cancelar el registro del extensor de alcance de
la unidad base
1
Desconecte el adaptador de CA del tomacorriente y, a continuación,
mantenga presionado
{
PROGRAM
}
.
2
Mientras mantiene oprimido
{
PROGRAM
}
, conecte de nuevo el adaptador
de CA.
L
Cuando la unidad se encuentre en el modo de cancelación del registro, el
indicador de ESTADO parpadeará de color rojo.
3
Siga oprimiendo
{
PROGRAM
}
durante aproximadamente 10 segundos,
hasta que el indicador de ESTADO iluminado en rojo. Después, deje de
oprimir
{
PROGRAM
}
.
L
Después de que se complete la cancelación del registro, el indicador de
ESTADO y el indicador
w
se encenderán de color ámbar durante 2 segundos.
A continuación, el indicador
w
se apagará.
TGA407(option)(sp).fm Page 4 Tuesday, December 26, 2017 11:46 AM