Answering System
39
For assistance, please visit http://www.panasonic.com/help
the phone rings for the 3rd time. You can
then hang up without being charged for
the call.
1
{
MENU
}
i
{#}{
2
}{
1
}{
1
}
2
{V}
/
{^}
: Select the desired setting.
i
{
Save
}
i
{
OFF
}
For voice mail service subscribers
If you subscribe to a flat-rate service
package that includes Caller ID, call
waiting, voice mail, and unlimited
local/regional/long distance calls, please
note the following:
L
To use the voice mail service provided
by your service provider/telephone
company rather than the unit’s
answering system, turn off the
answering system (page 34).
L
To use this unit’s answering system
rather than the voice mail service
provided by your service provider/
telephone company, please contact
your service provider/telephone
company to deactivate your voice mail
service.
If your service provider/telephone
company cannot do this:
– Set this unit’s
“
Ring count
”
setting so that this unit’s answering
system answers calls before the
voice mail service of your service
provider/telephone company does.
It is necessary to check the number
of rings required to activate the
voice mail service provided by your
service provider/telephone
company before changing this
setting.
– Change the number of rings of the
voice mail service so that the
answering system can answer the
call first. To do so, contact your
service provider/telephone
company.
Caller’s recording time
You can change the maximum message
recording time allotted to each caller.
You can also select
“
Greeting only
”
which sets the unit to greet callers but
not record messages. The default
setting is
“
3min
”
.
1
{
MENU
}
i
{#}{
3
}{
0
}{
5
}
2
{V}
/
{^}
: Select the desired setting.
i
{
Save
}
i
{
OFF
}
Note:
L
If you want to select
“
Greeting
only
”
, follow the steps above and
press
{
0
}
in step 2.
You may create your own greeting-
only message by following the steps
on page 35.
The unit plays the pre-recorded
greeting-only message asking callers
to call again if your own greeting-only
message is not recorded.
Message alert
You can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is
“
On
”
.
Important:
L
The message indicator will also flash
slowly if there are new-recorded voice
mail messages (page 41).
1
{
MENU
}
i
{#}{
3
}{
4
}{
0
}
2
{V}
/
{^}
: Select the desired setting.
i
{
Save
}
i
{
OFF
}
Note:
L
While message alert is on, battery
operating time is shortened (page 14).
TG93XX_OI.book Page 39 Thursday, December 27, 2007 3:38 PM
