Introduction
4
L
The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
L
This product is unable to make calls when:
– the handset batteries need recharging
or have failed.
– there is a power failure.
– the key lock feature is turned on.
Battery
L
We recommend using the batteries noted
on 5. oldal.
USE ONLY rechargeable Ni-
MH batteries AAA (R03) size.
L
Do not mix old and new batteries.
L
Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte may be
toxic if swallowed.
L
Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
L
Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
L
Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose
of batteries in a fire. They may explode.
Check with local codes for possible
special disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible
Panasonic units use radio waves to
communicate with each other.
L
For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such
as TVs, radios, personal computers,
wireless devices or other phones.
– avoid facing radio frequency
transmitters, such as external antennas
of mobile phone cell stations (avoid
putting the base unit on a bay window or
near a window).
L
Coverage and voice quality depends on
the local environmental conditions.
L
If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Environment
L
Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
TG8301-8321HG(e-hg).book Page 7 Tuesday, April 29, 2008 9:47 AM
