Panasonic KX-TG8231B Page 67 Service Manual Download

Page: 67 / 97

KX-TG8231B/KX-TG8232B/KX-TGA820B

12 Schematic Diagram

12.1. For Schematic Diagram

12.1.1. Base Unit (Schematic Diagram (Base Unit_Main))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

12.1.2. Handset (Schematic Diagram (Handset))

Notes:

1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagram may be modified at any time with the development of new technology.

12.1.3. Charger Unit (Schematic Diagram (Charger Unit))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagram may be modified at any time with the development of new technology.

Summary of Contents for KX-TG8231B


































































































Search results

Summary of Contents for KX-TG8231B

Reviews:

Related manuals for KX-TG8231B

Brands by name

Popular brands

Panasonic KX-TG8231B, Service Manual

Search results

Summary of Contents for KX-TG8231B

Reviews:

Related manuals for KX-TG8231B

Brands by name

Popular brands