Preparation
10
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Connections
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (
A
). Connect the AC adaptor
cord (
B
) by pressing the plug firmly (
C
).
Base unit
Important:
L
If you use a telephone line cord which
is not supplied, the unit may not work
properly.
Charger (KX-TG8202/KX-TG8222)
Note:
L
Never install telephone wiring during a
lightning storm.
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L
The unit will not work during a
power failure.
We therefore
recommend you also connect a
corded-type telephone (without AC
adaptor) to the same telephone line
using a T-adaptor. Your Panasonic
sales shop can offer you more
information about connection
possibilities.
Location
L
For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances
such as TVs, radios, personal
computers, or other phones.
USE ONLY the supplied cord.
Hooks
To AC mains outlet
(220–240 V, 50 Hz)
To telephone line
C
C
B
A
USE ONLY the
supplied AC adaptor.
USE ONLY the supplied
AC adaptor (Smaller).
Hooks
To AC mains outlet
(220–240 V, 50 Hz)
B
C
C
TG8200_20E.book Page 10 Monday, June 18, 2007 9:03 AM
