Problem
Cause/solution
I cannot connect my headset to
the base unit.
R
Confirm that your headset is turned on.
R
If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.
R
If someone is using a cellular line, you cannot connect the
headset. There can be only one active Bluetooth
connection at a time.
R
The headset has not been paired to the base unit. Pair
the headset (page 57).
Some headset enhanced
features are not available.
R
The base unit does not support enhanced features such
as Last number redial or Call reject.
An error tone is heard when I
try to program the Bluetooth
feature.
R
The Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.
R
The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.
Text message (SMS) alert is
not announced.
R
The text message (SMS) alert announcement depends
on the
“
Ring as cell (limited)
”
setting (page 19)
and the
“
Talking Caller ID
”
setting (page 41, 44).
To make the unit announce text message (SMS) alerts,
there are 2 methods available, depending on whether or
not you want the unit to emit the same ring as the cellular
phone when a call is being received on the cellular phone.
– If you prefer the same ring as the cellular phone, select
“
On (with Talking CID)
”
of the
“
Ring as
cell (limited)
”
setting.
– If you prefer the same ring as the unit, select
“
Off
”
of
the
“
Ring as cell (limited)
”
setting, and select
“
On
”
of the
“
Talking Caller ID
”
setting on the
handset and base unit.
77
Useful Information
TG78xxC(en)_1221_ver013.pdf 77
2012/12/21 11:21:33