Panasonic KX-TG7653AZ Operating Instructions Manual Download

Page: 1 / 76

Operating Instructions

Digital Cordless Telephone with Link-to-Cell System

Model shown is KX-TG7652.

Model No.

KX-TG7652AZ
KX-TG7653AZ

Before initial use, see “Getting
Started” on page 10.

Thank you for purchasing a Panasonic product.

Please read these operating instructions before using the unit and save
them for future reference.

This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.

To use this unit in your country, first change the unit’s region setting
to match your country (page 38).

Please access our online customer survey:
http://panasonic.net/pcc/tel/q

TG76xxAZ(en)_0207_ver012.pdf 1

2012/02/07 15:34:45

Summary of Contents for KX-TG7653AZ













































































Search results

Summary of Contents for KX-TG7653AZ

Reviews:

Related manuals for KX-TG7653AZ

Brands by name

Popular brands

Panasonic KX-TG7653AZ, Operating Instructions Manual

Search results

Summary of Contents for KX-TG7653AZ

Reviews:

Related manuals for KX-TG7653AZ

Brands by name

Popular brands