Problem
Cause/solution
The base unit does not
ring.
R
The ringer volume is turned off. Adjust ringer volume (page 26).
I cannot make a call.
R
If you are using a BT double adaptor to connect the unit,
remove the adaptor and connect the unit to the phone wall
socket directly. If the unit operates properly, check or replace
the adaptor.
R
You dialled a call restricted number (page 31).
R
The key lock feature is turned on. Turn it off (page 19).
R
The unit is not designed to be used with rotary/pulse dialling
services.
Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R
You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.
R
If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall
socket.
R
If you use a DSL/ADSL (JetStream) service, we recommend
that you contact your DSL/ADSL service provider to have a
DSL/ADSL Splitter installed. We do not recommend the use of
generic DSL/ADSL filters. Contact your DSL/ADSL service
provider for details.
R
Other telephone equipment such as a monitored Burglar Alarm
or the modem in the SKY Digital decoder may be interfering
with this unit. Disconnect the other equipment and try again.
Caller information is slow
to display.
R
Depending on your service provider/telephone company, the
unit may display the caller’s information at the 2nd ring or later.
Set the first ring to
“
Off
”
(page 26).
R
Move closer to the base unit.
Time on the unit has
shifted.
R
Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to
“
Manual
”
(off) (page 26).
The name stored in the
phonebook is not fully
displayed while an outside
call is being received.
R
Edit the phonebook entry name to fit in 1 line of text (page 21).
50
Useful Information
PNQX5803YA_0719_ver122.pdf 50
2013/07/19 10:53:46
