Panasonic KX-TG6711NZ Operating Instructions Manual Download

Page: 44 / 52

Error messages

Display message

Cause/solution

Base no power

No link. Reconnect
AC adaptor.

No link.

The handset has lost communication with the base unit. Move
closer to the base unit and try again.

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

The handset’s registration may have been cancelled.
Re-register the handset (page 31).

When

“

No link.

”

is displayed during a power failure, place

a handset on the base unit to supply power to the base unit.

Check Phone Line

The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 10).

Error

Recording was too short. Try again.

Failed

Phonebook copy failed (page 23). Confirm the other handset
(the receiver) is in standby mode and try again.

Incomplete

The receiver’s phonebook memory is full. Erase the unwanted
phonebook entries from the other handset (the receiver) and
try again.

Memory Full

The phonebook memory is full. Erase unwanted entries
(page 22).

Message memory is full. Erase unwanted messages
(page 36, 37).

The call barred list memory is full. Erase unwanted entries
(page 30).

Use rechargeable
battery.

A wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 7.

You must first
subscribe to Caller
ID.

You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.

Useful Information

TG6711_21NZ(en)_0216_ver011.pdf 44

2012/02/17 15:48:59

Summary of Contents for KX-TG6711NZ





















































Search results

Summary of Contents for KX-TG6711NZ

Reviews:

Related manuals for KX-TG6711NZ

Brands by name

Popular brands

Panasonic KX-TG6711NZ, Operating Instructions Manual

Search results

Summary of Contents for KX-TG6711NZ

Reviews:

Related manuals for KX-TG6711NZ

Brands by name

Popular brands