SMS (Short Message Service)
34
Using SMS
SMS allows you to send and receive text
messages between other fixed-line and mobile
phones that support compatible SMS
networks and features.
Important:
L
To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service such as SMS.
– confirm that SMS is turned on.
– confirm that the correct message centre
numbers are stored.
Contact your service provider/telephone
company for details and availability.
Note:
L
A total of 47 messages (at 160 characters/
message) can be saved. Total number may
be more than 47 if length of messages is
less than 160 characters/message.
L
If the unit is connected to a PBX system,
you may not be able to use SMS features.
Turning SMS on/off
1
8
(
357
2
{
r
}
: Select the desired setting.
s
M
s
{i
c
}
Storing SMS message
centre numbers
SMS message centre numbers must be stored
in order to send and receive SMS messages.
For Czech:
The message centre numbers (used for SMS
services provided by Telefonica O2) are
preprogrammed in this unit. You can change
them if necessary.
For Slovakia:
The message centre numbers (used for SMS
service provided by Slovak Telecom - T-Com)
are preprogrammed in this unit. You can
change them if necessary.
L
Contact your service provider/telephone
company for more information.
L
If you change the unit’s region setting/reset
the base unit, the stored message centre
numbers will be deleted or changed (page
24). In this case, store the numbers again if
necessary.
1
To store “
Message Centre1
”:
8
(
351
To store “
Message Centre2
”:
8
(
352
2
Edit the number as necessary.
s
M
s
{i
c
}
Note:
L
For PBX users:
– You need to add the PBX line access
number and a dialling pause to the
beginning of the Message Centre 1
number.
– If you only use the Message Centre 1
number for SMS, store the Message
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
Sending a message
Writing and sending a new
message
1
8
(
35
)
2
{
r
}
:
“
Create
”
s
M
3
Enter a message.
s
M
L
You can change the character entry
mode by pressing
/
(page 44).
4
Enter the destination phone number (20
digits max.).
s
M
To use the redial list:
{
>
}
(
R
)
s
{
r
}
: Select the phone
number.
s
M
2 times
To use the caller list:
{
<
}
(
y
)
s
{
r
}
: Select the party.
s
M
2 times
L
If
>
is displayed, not all of the
information is shown. To see the
remaining information, press
{
>
}
. To
TG661x_662xFX(e).book Page 34 Wednesday, March 2, 2011 2:31 PM
