Useful Information
51
For assistance, please visit http://www.panasonic.com/help
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
L
You must subscribe to Caller ID service. Contact
your service provider/telephone company for
details.
L
If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, plug the unit directly
into the wall jack.
L
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L
The name display service may not be available in
some areas. Contact your service provider/
telephone company for details.
L
Other telephone equipment may be interfering
with this unit. Disconnect the other equipment and
try again.
Caller information is not
announced.
L
The handset or base unit’s ringer volume is turned
off. Adjust it (page 17, 25).
L
The Talking Caller ID feature is turned off. Turn it
on (page 26).
L
The number of rings for the answering system is
set to
“
2 rings
”
or
“
Toll saver
”
. Select a
different setting (page 41).
L
If the base unit and another handset are having an
intercom call, your handset does not announce
caller information.
Caller information is
displayed or announced
late.
L
Depending on your service provider/telephone
company, the unit may display or announce the
caller’s information at the 2nd ring or later.
L
Move closer to the base unit.
The caller list/incoming
phone numbers are not
edited automatically.
L
The Caller ID number auto edit feature is turned
off. Turn it on and try again (page 26).
L
You need to call back the edited number to
activate Caller ID number auto edit.
I cannot dial the phone
number edited in the caller
list.
L
The phone number you dialed might have been
edited incorrectly (for example, the long distance
“1” or the area code is missing). Edit the phone
number with another pattern (page 34).
TG6511(e).book Page 51 Wednesday, April 28, 2010 4:35 PM
