Panasonic KX-TG6421FXS, Service Manual

Page: 29 / 105

29
KX-TG6421FXS/KX-TG6421FXT/KX-TGA641FXS/KX-TGA641FXT
Frequently Used Items (Base Unit)
ex.)
Note:
(*1) Refer to Registering a Handset to a Base Unit (P.21).
(*2) When you enter the address or New Data, please refer to the table below.
(*3)
Items Address Default Data New Data Remarks
C-ID (FSK) sensitivity 04 B6 00 01 (6 dB up) 02 (12 dB up) When hex changes from “00” to “01” or “02”,
gain increases by 6 dB or 12 dB.
C-ID (DTMF) sensitivity 04 C4 50 60 (6 dB up) 70 (12 dB up) When hex changes from “50” to “60” or “70”,
gain increases by 6 dB or 12 dB.
SMS (FSK) receiving sensitiv-
ity 04 B6 00 01 (6 dB up) 02 (12 dB up) When hex changes from “00” to “01” or “02”,
gain increases by 6 dB or 12 dB.
SMS (FSK) sending level 04 D0/04 CF 13/3B 19/20 (6 dB
up)
32/40 (12 dB
up)
When hex changes from “00 0B” to “00 16” or
“00 2C”, gain increases by 6 dB or 12 dB.
Frequency 00 02/00 01 02/70 - - Use these items in a READ-ONLY mode to
confirm the contents. Careless rewriting may
cause serious damage to the computer system.
ID 00 10~00 14 Given value - -
Bell length 01 F7 32 (5sec) (*3) 1E (3 sec) 14 (2 sec) This is time until bell stops ringing.
(Unit: 100 ms)
PULSE Dial speed
(10PPS -> 20PPS) 03 9F 2D (40msec)
(*3)
13 (20msec) - This is pulse make time. (Unit:1ms)
03 A0 37 (60msec)
(*3)
1F (30msec) - This is pulse break time. (Unit:1ms)
01 E4 57 (870msec)
(*3)
2C (440msec) - This is inter-digit time in pulse mode.
(Unit:10ms)
Items Address Default Data New Data Remarks
SMS MailBox1 Password 3F BC/3F BD Given value 00/00 When New Data is input, the password of
MailBox1 becomes “0000”.
SMS MailBox2 Password 3F BE/3F BF Given value 00/00 When New Data is input, the password of
MailBox2 becomes “0000”.
SMS MailBox3 Password 3F C0/3F C1 Given value 00/00 When New Data is input, the password of
MailBox3 becomes “0000”.
SMS MailBox4 Password 3F C2/3F C3 Given value 00/00 When New Data is input, the password of
MailBox4 becomes “0000”.
SMS MailBox5 Password 3F C4/3F C5 Given value 00/00 When New Data is input, the password of
MailBox5 becomes “0000”.
SMS MailBox6 Password 3F C6/3F C7 Given value 00/00 When New Data is input, the password of
MailBox6 becomes “0000”.
Desired Number (hex) Input Keys Desired Number (hex) Input Keys
0 0 A [R] + 0
1 1 B [R] + 1
. . C [R] + 2
. . D [R] + 3
. . E [R] + 4
9 9 F [R] + 5
Bell length 32 (hex) = 50 (dec)
→
50
×
100 msec = 5000 msec (5 sec)
PULSE Dial speed
(10PPS -> 20PPS) 2D (hex) = 45 (dec)
→
(45 - 5)
×
1 msec = 40 msec
37 (hex) = 55 (dec)
→
(55 + 5)
×
1 msec = 60 msec
57 (hex) = 87 (dec)
→
87
×
10 msec = 870 msec