Panasonic KX-TG6412E Operating Instructions Manual Download

Page: 21 / 48

Programming

Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

*1 If you program these settings using one of the handsets, you do not need to

program the same item using another handset.

*2 This feature allows the unit to automatically adjust the date and time each time

caller information including date and time is received.
To turn this feature on, select

“

Caller ID

”

. To turn this feature off, select

“

Manual

”

. (Caller ID subscribers only)

To use this feature, set the date and time first (page 15).

*3 When the ringer volume is turned off,

is displayed and the handset does not ring

for outside calls.
However even when the ringer volume is set to off, the handset rings:
– at the low level for alarm (page 22) and intercom calls (page 35)
– at the high level for paging (page 35)

*4 If you select one of the melody ringer tones, the ringer tone continues to play for

several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.

Copyrights Vision Inc.

*6 Turn this feature off if you prefer not to hear key tones while you are dialling or

pressing any keys, including confirmation tones and error tones.

*7 If you subscribe to a Caller ID service and want to view the caller’s information

after lifting up the handset to answer a call, turn off this feature.

*8 KX-TG6421/KX-TG6422/KX-TG6423/KX-TG6424
*9 To prevent other users from joining your conversations with outside callers, turn

this feature on.

*10 The recall/flash time depends on your telephone exchange or host PBX. Contact

your PBX supplier if necessary.

Base Unit Setup

Ringer Volume

Medium

–

Privacy Mode

Off

–

Recall/Flash

*10

100 msec.

–

Base Unit PIN

0000

–

Repeater

Off

–

Caller Barred

*1,

–

Top-menu

Sub-menu 1

Sub-menu 2

Page

TG6411-6421E(e).book Page 21 Tuesday, December 16, 2008 7:54 AM

Summary of Contents for KX-TG6412E

















































Search results

Summary of Contents for KX-TG6412E

Reviews:

Related manuals for KX-TG6412E

Brands by name

Popular brands

Panasonic KX-TG6412E, Operating Instructions Manual

Search results

Summary of Contents for KX-TG6412E

Reviews:

Related manuals for KX-TG6412E

Brands by name

Popular brands