Panasonic KX-TG6381LBB Service Manual Download Page 65

Page: 65 / 102

KX-TG6381LBB/KX-TG6381LBS/KX-TG6382LBB/KX-TGA632LBB/KX-TGA632LBS

13 Schematic Diagram

13.1. For Schematic Diagram

13.1.1. Base Unit (Schematic Diagram (Base Unit_Main))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

13.1.2. Handset (Schematic Diagram (Handset_Main))

Notes:

1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams may be modified at any time with the development of new technology.

13.1.3. Charger Unit (Schematic Diagram (Charger Unit))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

Summary of Contents for KX-TG6381LBB







































































































Search results

Summary of Contents for KX-TG6381LBB

Reviews:

Related manuals for KX-TG6381LBB

Brands by name

Popular brands

Panasonic KX-TG6381LBB, Service Manual

Search results

Summary of Contents for KX-TG6381LBB

Reviews:

Related manuals for KX-TG6381LBB

Brands by name

Popular brands