background image

Useful Information

51

For assistance, please visit http://www.panasonic.com/help

about what will disable alarm 
equipment, consult your telephone 
company or a qualified installer.

This equipment is hearing aid 
compatible as defined by the FCC in 
47 CFR Section 68.316.

When you hold the phone to your ear, 
noise might be heard in your Hearing 
Aid. Some Hearing Aids are not 
adequately shielded from external RF 
(radio frequency) energy. If noise 
occurs, use the speakerphone option 
(if applicable) when using this phone. 
Consult with your audiologist or 
Hearing Aid manufacturer about the 
availability of Hearing Aids which 
provide adequate shielding to RF 
energy commonly emitted by digital 
devices.

WHEN PROGRAMMING 
EMERGENCY NUMBERS AND(OR) 
MAKING TEST CALLS TO 
EMERGENCY NUMBERS:
1) Remain on the line and briefly 

explain to the dispatcher the reason 
for the call.

2) Perform such activities in the off-

peak hours, such as early morning 
or late evenings.

This device complies with Part 15 of 
the FCC Rules. Operation is subject to 
the following two conditions:
(1) This device may not cause harmful 
interference, and (2) this device must 
accept any interference received, 
including interference that may cause 
undesired operation.
Privacy of communications may not 
be ensured when using this phone.

CAUTION:

Any changes or modifications not 
expressly approved by the party 
responsible for compliance could void 
the user’s authority to operate this 
device.

NOTE:

This equipment has been tested and 
found to comply with the limits for a 
Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are 
designed to provide reasonable 
protection against harmful interference 
in a residential installation. This 
equipment generates, uses, and can 
radiate radio frequency energy and, if 
not installed and used in accordance 
with the instructions, may cause 
harmful interference to radio 
communications. However, there is no 
guarantee that interference will not 
occur in a particular installation. If this 
equipment does cause harmful 
interference to radio or television 
reception, which can be determined by 
turning the equipment off and on, the 
user is encouraged to try to correct the 
interference by one or more of the 
following measures:
– Reorient or relocate the receiving 

antenna.

– Increase the separation between the 

equipment and receiver.

– Connect the equipment into an outlet 

on a circuit different from that to 
which the receiver is connected.

– Consult the dealer or an experienced 

radio/TV technician for help.

Some cordless telephones operate at 
frequencies that may cause 
interference to nearby TVs and VCRs. 
To minimize or prevent such 
interference, the base of the cordless 
telephone should not be placed near 
or on top of a TV or VCR. If 

TG63xx_OI.book  Page 51  Thursday, January 10, 2008  9:02 AM

Summary of Contents for KX-TG6311





























































Reviews: