Programming
40
Programmable settings
You can customize the unit by programming the following features using the handset. To
access the features, there are 2 methods:
– scrolling through the display menus (page 40)
– using the direct commands (page 45)
L
Mainly the direct command method is used in these operating instructions.
L
To change the base unit ringer volume and tone, see page 26.
Programming by scrolling through the display menus
1
{
MENU
}
(middle soft key)
2
Press
{^}
,
{V}
,
{
<
}
, or
{
>
}
to select the desired menu.
i
{
SELECT
}
L
If there are sub-menu(s), press
{^}
or
{V}
to select the desired item.
i
{
SELECT
}
Example:
To access the handset ringer volume setting
Press
{^}
,
{V}
,
{
<
}
, or
{
>
}
to select
(
.
i
{
SELECT
}
Then press
{^}
or
{V}
to select “
Ringer volume
”.
i
{
SELECT
}
3
Press
{^}
or
{V}
to select the desired setting.
L
This step may vary depending on the feature being programmed.
4
{
SAVE
}
i
{
OFF
}
TG577xC(e).book Page 40 Thursday, April 13, 2006 5:40 PM
