Programming
For assistance, please visit http://www.panasonic.com/phonehelp
33
*1 If you program these settings using one of the handsets, you do not need to program
the same item using another handset (KX-TG5672/KX-TG5673).
*2 KX-TG5672/KX-TG5673
Programming using the direct commands
Initial setting
Set answering
Ring count
*1
page 41
Recording time
*1
page 42
Remote code
*1
page 41
Message alert
–
page 42
LCD contrast
–
–
Key tone
–
–
Auto talk
–
page 20
Caller ID edit
–
–
Time adjustment
*1
–
–
Set tel line
Set dial mode
*1
page 18
Set flash time
*1
–
Set line mode
*1
–
Set base unit
Talking CallerID
*1
–
Registration
–
page 46
Change language
–
page 18
1
{
MENU
}
2
Enter the desired feature code.
3
Enter the desired setting code.
L
This step may vary depending on the
feature being programmed.
4
{
Save
}
i
{
OFF
}
Note:
L
In the following table:
– < > shows the default setting.
– If “System setting” column is checked,
you do not need to program the same
item using another handset (KX-
TG5672/KX-TG5673).
L
If you make a mistake or enter the wrong
code, press
{
OFF
}
, then start again by
pressing
{
MENU
}
.
Main menu
Sub-menu 1
Sub-menu 2
Page
TG5671_72_73(e).book Page 33 Wednesday, January 11, 2006 7:03 PM
