Useful Information
39
Call Display
Problem
Cause/solution
Caller information is not
displayed.
L
You need to subscribe to Call Display service.
Contact your service provider/telephone
company for details.
L
If your unit is connected to any additional
telephone equipment such as a Call Display
box or cordless telephone line jack, plug the
unit directly into the wall jack.
L
If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L
The name display service may not be
available in some areas. Contact your service
provider/telephone company for details.
L
Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
Caller information is displayed
late.
L
Depending on your service
provider/telephone company, the unit may
display the caller’s information at 2nd ring or
later.
L
Move closer to the base unit.
I cannot dial the phone number
edited in the caller list.
L
The phone number you dialed might have
been edited incorrectly (for example, the long
distance “1” or the area code is missing). Edit
the phone number with another pattern (page
28).
Time on the unit is shifted.
L
Incorrect time information from incoming Call
Display changes the time. Set the time
adjustment to off (page 23).
The 2nd caller’s information is
not displayed during an outside
call. (Visual Call Waiting
feature does not function.)
L
In order to use Call Display, call waiting, or
Visual Call Waiting, you must first contact your
service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact
your service provider/telephone company
again to activate this specific service, even if
you already subscribed to both Call Display
and Visual Call Waiting services.
TG431xC_OI.book Page 39 Tuesday, January 29, 2008 2:56 PM
