Making/Answering Calls
23
L
Wait until speakerphone is turned
on automatically and the call is
made.
3
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
4
When you finish talking, press
{
OFF
}
.
Note:
L
In step 2, if you do not place the handset on
the base unit within 1 minute, the power
back-up mode turns off. In this case, press
{
OFF
}
on the handset and dial the phone
number. Then try again from step 2.
■
When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. For the
operation, please see “Making calls”, page
18.
Note:
L
During a call with the handset placed on the
base unit (power back-up mode), the call
may be disconnected if you touch the
handset. In such case, try to call back.
L
The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
Making a call using the redial list
■
When only 1 handset is registered:
1
Lift the handset.
2
{
REDIAL
}
or
{
4
}
REDIAL
3
{
r
}
: Select the desired phone number.
4
Within 1 minute, place the handset on
the base unit.
L
Wait until speakerphone is turned
on automatically and the call is
made.
■
When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. For the
operation, please see “Making a call using
the redial list”, page 18.
Making a call using the handset
phonebook
■
When only 1 handset is registered:
1
Lift the handset.
2
{
C
}
3
{
r
}
: Select the desired entry.
4
Within 1 minute, place the handset on
the base unit.
L
Wait until speakerphone is turned
on automatically and the call is
made.
■
When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. For the
operation, please see “Finding and calling
from a phonebook entry”, page 24.
Answering calls during a power
failure
■
When only 1 handset is registered:
1
When the unit rings, keep the handset
on the base unit and press
{C}
or
{s}
.
L
Speakerphone is turned on.
2
When you finish talking, press
{
OFF
}
.
■
When 2 or more handsets are registered:
When the unit rings, use a handset which is
not supplying power to the base unit. For
the operation, please see “Answering calls”,
page 19.
L
Do not use or lift the handset which is
placed on the base unit during power
back-up mode.
Note:
L
During a call with the handset placed on the
base unit (power back-up mode), the call
may be disconnected if you touch the
handset. In such case, try to call back.
L
The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
TG37xx38xxBX(e).book Page 23 Wednesday, June 8, 2011 2:08 PM
