31
KX-TG3661JXM/KX-TG3662JXM/KX-TG3668JXM/KX-TG3669JXM/KX-TGA365JXM
10.1.8. Check the RF part
10.1.8.1. Finding out the Defective part
After All the Checkings or Repairing
1. Re-register the checked CL-HS to the checked BU, and Standard CL-HS to Standard BU.
Note:
(*1) CL-HS: Cordless Handset
(*2) BU: Base Unit
10.1.8.1.1. Registering a Cordless Handset to a Base unit
10.1.8.1.2. Deregistering a Cordless Handset
1. Prepare "Standard BU (*2)" and "Standard CL-HS (*1)"
2. a. Re-registered standard CL-HS (Normal mode) to the BU (to be checked).
b. Re-registered CL-HS (to be checked) to standard BU (Normal mode).
If this operation fails in some ways, the CL-HS is defective.
Base Unit is defective
CL-HS defective
START
Registration of
Standard CL-HS to
Base Unit
Registration of
CL-HS to
Standard BU
(other checkings)
Registration of CL-HS to Base Unit
(checked ones)
Registration of Stanard CL-HS to Standard BU
Yes
No
No
Yes
The supplied handset and base unit are pre-registered. If for some reason the handset is not registered
to the base unit, register the handset.
1
Base unit:
Press and hold
{
LOCATOR
}
for about 5 seconds until
L
flashes.
L
If the registered handset starts ringing, press the same button to stop. Then repeat this step.
L
The next step must be completed within 3 minutes.
2
Handset:
!
i
{#}{
1
}{
2
}{
3
}
i
M
3
Press
{
2
}
to select
Register HS
.
L
A long beep sounds from the handset.
L
L
disappears from the base unit.
A handset can cancel its own registration that is stored in the base unit. This allows the handset to end
its wireless connection with the system.
Important:
L
If you do not use the handset after canceling registration, remove the batteries.
L
If you cancel the handset registration of the extension number 1, the date and time are not backed up
during a power failure.
1
!
i
{#}{
1
}{
2
}{
3
}
i
M
2
Press
{
1
}
to select
Cancel HS
.
3
Select the handset you want to cancel by pressing the desired handset number.
4
Remove the batteries from the deregistered handset.
