Panasonic KX-TG2873BXS Service Manual Download Page 28

Page: 28 / 103

KX-TG2873BXS/KX-TGA280BXS

7.2.

Dial Lock

This feature prohibits making outside calls. The default setting is OFF.

Important:

• When dial lock is turned on, you can dial the emergency calls in the following ways:

- Phone numbers stored in the phonebook as emergency numbers (numbers stored with a # at the beginning of the name) can

be dialed using the phonebook.

- You can dial by pressing the one-touch dial buttons.

We recommend storing emergency numbers in the phonebook or the one-touch dial buttons before using this feature.

• When dial lock is turned on, you cannot store, edit, or erase items in the phonebook or the one-touch dial button.

7.2.1.

To Turn Dial Lock On

7.2.2.

To Turn Dial Lock Off

Summary of Contents for KX-TG2873BXS








































































































Search results

Summary of Contents for KX-TG2873BXS

Reviews:

Related manuals for KX-TG2873BXS

Brands by name

Popular brands

Panasonic KX-TG2873BXS, Service Manual

Search results

Summary of Contents for KX-TG2873BXS

Reviews:

Related manuals for KX-TG2873BXS

Brands by name

Popular brands