Panasonic KX-TG2871CN Operating Instructions Manual Download Page 63

Page: 63 / 68

Useful Information

Answering system

Problem

Cause & solution

I cannot listen to
messages from a remote
location.

You must set the remote code beforehand (page 49).

A touch tone phone is required for remote operation.

Press the remote code correctly and press each key
firmly (page 48).

The answering system is off. Turn it on (page 48).

The ANSWER ON
indicator flashes rapidly.
No new messages are
recorded.

Message memory is full. Erase unnecessary messages
(page 45).

The unit does not record
new messages.

The answering system is turned off. Turn it on (page 44,
48).

The recording time is set to “

仅问候语不能录音

”. Select

“2

分钟

” or “

最大

” (page 49).

Message memory is full. Erase unnecessary messages
(page 45).

I cannot operate the
answering system.

The other cordless handset or base unit is in use.

Someone is operating the answering system. Try again
later.

During message
playback, the unit rings
and cancels playback.

A call is being received. Answer the call and start again
from the beginning after hanging up.

The ANSWER ON
indicator on the base unit
flashes slowly.

New messages have been recorded. Listen to the new
messages (page 45).

When you play back
messages,
– the base unit and

cordless handset do
not announce the day
and time.

– the cordless handset

displays the date and
time incorrectly.

The date and time may be set incorrectly or the power
failure may be occurred. Set the date and time again
(page 17).

ENG_TG2871CN.book 63 ページ２００６年５月１日　月曜日　午前１１時３３分

Summary of Contents for KX-TG2871CN





































































Search results

Summary of Contents for KX-TG2871CN

Reviews:

Related manuals for KX-TG2871CN

Brands by name

Popular brands

Panasonic KX-TG2871CN, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2871CN

Reviews:

Related manuals for KX-TG2871CN

Brands by name

Popular brands