Useful Information
60
Making/answering calls, Intercom
Problem
Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L
Move the cordless handset and the base unit away from
other electrical appliances.
L
Move closer to the base unit.
L
Raise the base unit antenna.
L
If your unit is connected to a telephone line with xDSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
The cordless handset
and/or base unit does not
ring.
L
The ringer volume is turned off. Adjust it (page 21, 22).
L
The night mode feature is turned on. Turn it off
(page 50).
I cannot make a call.
L
The dialing mode may be set incorrectly. Set the dial
mode (page 17) to match the type of telephone service
you have (tone or pulse).
L
While the answering system is answering a call, or the
other cordless handset is in use, you may not be able to
make a call. Try again later.
I cannot redial by
pressing
{
重拨
}
.
L
If the last number dialed was more than 24 digits long,
the number will not be redialed correctly.
L
If you press
{
重拨
}
on the base unit after you have
started dialing, this button functions as the
{
暂停
}
button. To redial, do not dial any numbers before
pressing
{
重拨
}
.
I cannot page the
cordless handset or base
unit.
L
The called cordless handset is too far from the base
unit.
L
The called unit is in use. Try again later.
I cannot make a voice
announcement.
L
The other cordless handset or base unit is in use. Try
again later.
ENG_TG2871CN.book 60 ページ ２００６年５月１日 月曜日 午前１１時３３分
