manualshive.com logo in svg

Panasonic KX-TG2750S, Operating Instructions Manual

Share
Download
Panasonic KX-TG2750S Operating Instructions Manual Download Page 47

47

Voice Mail Service

Ad
v

anced Operation

For assistance, please call: 1-800-211-PANA(7262)

Listening to Voice Mail Messages 

The unit will let you know that someone has left voice mail for you in three ways; 
(a) VM indicator will flash on the base unit,
(b) “

Voice mail

” will be displayed on the cordless handset, and

(c) “

 

 

” will flash on the cordless handset. 

To listen to your voice mail message(s), follow the steps below.

• If “

Store VM access#

” is displayed and 3 beeps sound, store the number (p. 45).

• After listening to your message(s), “

 

 

” stops flashing but remains on the 

cordless handset display.

• If the base unit and cordless handset still indicate you have new messages even 

after you have listen to them, turn them off as follows.
—for the base unit: Press 

[FUNCTION/EDIT]

, then press and hold 

[CLEAR] 

until 

the unit beeps.

—for the cordless handset: Press 

[CONF/FUNCTION]

, then press and hold 

[HOLD/CLEAR] 

until the unit beeps.

“

Voice mail

” will disappear, “

 

 

” on the cordless handset stops flashing 

but remains and the VM indicator will turn off.

• If your voice mail service uses a voice mail tone and the recorded message is 

over 3 minutes long, the base unit and cordless handset may not indicate you 
have new messages.

• If your voice mail service uses a voice mail tone, the tone will be heard from any 

parallel connected phone. If you use another phone to retrieve messages, you 
have to dial your access number manually.

1

Press 

[VM]

.

• The base unit connects to the telephone line and dials the access number 

(p. 45).

• To switch from the speakerphone to the handset, lift it off the cradle.

2

Follow the pre-recorded instructions.

3

When finished, place the handset on the cradle or if using the 
speakerphone press 

[DIGITAL SP-PHONE]

.

1

Press the soft key (

), then press 

[

] 

or 

[

]

.

• The cordless handset connects to the telephone 

line and dials the access number (p. 45).

2

Follow the pre-recorded instructions.

3

When finished, press

 

[OFF]

.

Base Unit Handset

M A I L

Base Unit

Handset

MAIL

   Voice mail

M A I L

M A I L

M A I L

Summary of Contents for KX-TG2750S









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands