Panasonic KX-TG2750S Operating Instructions Manual Download Page 29

Page: 29 / 72

Basic Operation

Using the Caller List

For assistance, please call: 1-800-211-PANA(7262)

Storing Caller List Items in the Directory

Callers’ names and phone numbers that are in the base unit or cordless handset
Caller List can be stored in each unit’s directory.

• You cannot store Caller List items in the directory if a phone number is not displayed.

Erasing Caller List Items

To erase a specific item

Scroll to the desired caller by pressing

[ ]

• If the number requires editing, see page 27.

Press

[ ]

• To stop storing, press

[ ]

Press

[ ]

again.

• If there is no name information for the caller, “

Enter name

” will be displayed.

–

You can enter a name by performing the following steps:

(1) enter the name (p. 31), (2) press

[ ]

, and (3) press

[ ]

(

Save

) on the

base unit or press the soft key (

) on the cordless handset.

–If a name is not required, press

[ ]

, then press

[ ]

(

Save

) on the base unit

or press the soft key (

) on the cordless handset.

• To continue storing other items, repeat from step 1.
• To exit the programming mode, press

[EXIT]

on the base unit. For the

cordless handset, press

[OFF]

Scroll to the desired caller by
pressing

[ ]

Base unit:

Press

[CLEAR]

Cordless handset:

Press

[HOLD/CLEAR]

• “

Clear

” is displayed.

• To erase other items, repeat

from step 1.

• To exit the Caller List, press

[EXIT]

on the base unit.

For the cordless handset, press

[OFF]

Base Unit Handset

TURNER,CINDY

1-555-456-7890
11:20A JAN.12

▼

Save directory?

=No =Yes

▼

Base Unit Handset

To erase all items

Press

[ ]

to enter the

Caller List.

• Before erasing all items, make

sure that “

0 new call

” is

displayed.

Base unit:

Press

[CLEAR]

Cordless handset:

Press

[HOLD/CLEAR]

• To stop erasing, press

[ ]

Base unit:

Press

[CLEAR]

again.

Cordless handset:

Press

[HOLD/CLEAR]

again.

• “

All clear

” is displayed and

all items in your Caller List are
erased.

▼

Summary of Contents for KX-TG2750S









































































Search results

Summary of Contents for KX-TG2750S

Reviews:

Related manuals for KX-TG2750S

Brands by name

Popular brands

Panasonic KX-TG2750S, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2750S

Reviews:

Related manuals for KX-TG2750S

Brands by name

Popular brands