Panasonic KX-TG2740S - 2.4 GHz DSS Expandable Cordless..., Operating Instructions Manual

Page: 85 / 124

85
Answering System
For assistance, please call: 1-800-211-PANA(7262)
To turn on the Answering System for the selected line(s)
Press
(ANSWER!ON)
.
•
The ANSWER ON indicator lights.
•
“ Answer set ” with the line(s) and the current day and
time will be announced.
•
The unit will announce the remaining recording time
if it is less than 5 minutes.
•
If you hear “ Memory full ”, “ ” is
displayed on the base unit and the ANSWER ON
indicator flashes rapidly, erase some, or all, of the
messages (p. 88).
•
You can also turn on the Answering System remotely using any other phone (p. 98).
•
If you turn the Answering System on with “ ” flashing, “ ” will disappear but
the clock is still incorrect. Adjust the date and time (p. 20). If you subscribe to a
Caller ID service (p. 40), the caller ID information will adjust the clock.
To turn off the Answering System
Press
(ANSWER!ON)
.
•
The ANSWER ON indicator light goes out and “ Answer off ” is heard.
•
To turn off the Answering System on either line when the system is turned on for
both lines, select the line which you want to leave on by programming (p. 84)
without pressing
(ANSWER!ON) .
Monitoring incoming calls
While a call is being recorded, you can monitor it through the base unit
speaker.
•
To increase the speaker volume, press Ñ . To decrease, press Ö .
•
If both lines are receiving calls at the same time, only the first one can be monitored.
To answer the call with the base unit speakerphone, press the called line
button. For the handset, press the relevant soft key (
or ).
The unit stops recording.
To turn the Call Monitoring feature off:
If the call monitoring feature is not required, turn it off by programming.
1. While the base unit is not in use, press
(FUNCTION)
, and scroll to
“
Initial setting
” by pressing
Ö
or
Ñ
, and press
á
.
2. Scroll to “
Set answering
” by pressing
Ö
or
Ñ
, and press
á
.
3. Scroll to “
Call monitoring
” by pressing
Ö
or
Ñ
, and press
á
.
4. Select “
Off
” by pressing
Ö
or
Ñ
.
5. Press
á
(Save).
•
To turn the feature on , select “
On
” in step 4, and press á (Save).
LINE2 LINE1
ALL MAILBOX FULL
Answer set L1&L2
G
Ex. Answer set for both
lines
M A I L B O X
Call monitoring
:Off
GF
H
=Save