Panasonic KX-TG2670N - 2.4 GHz DSS Cordless Speakerphone Operating Instructions Manual Download Page 62

Page: 62 / 92

Pager Call

Pager Mode Setting

After subscribing to a Caller ID service

(p. 34), you can select one of

the following pager mode settings. The unit will alert your pager:

If you want to change the mode, proceed as follows.

Press

(FUNCTION/CH)

Press

repeatedly until the arrow

points to “

Program

”.

Press

(

Yes

key).

Press

repeatedly until the arrow

points to “

TAD program

”.

Press

(

Yes

key).

•

The base unit display shows programming
options.

Press

(6)

•

The current setting is displayed on the base
unit.

To select “

Received call

”, press

(2)

OR
To select “

Recorded MSG

”, press

(1)

Press

(

Save

key).

•

A beep sounds.

•

To return to the standby mode, press

(OFF)

•

If you select “

Received call

” and set the unit to call your pager (p. 63), the unit

will alert your pager even if the answering system is not turned on.

•

If you select “

Received call

”, and a Call ID call is received with no telephone

number, the unit will only alert your pager if the caller leaves a message.

Answering
system setting.
See base unit.

Pager mode
:Recorded MSG

Base unit display

Recorded MSG:

After the unit records an incoming message
(factory preset),

Received call:

Each time the unit receives a Caller ID call, even if
the caller does not leave a message.

Pager mode
:Received call

Base unit display

Set dial mode

TAD program

=Yes

Program
Calling pager

=Yes

Save DIRECT#
Set flash time

=Yes

Summary of Contents for KX-TG2670N - 2.4 GHz DSS Cordless Speakerphone





























































































Search results

Summary of Contents for KX-TG2670N - 2.4 GHz DSS Cordless Speakerphone

Reviews:

Related manuals for KX-TG2670N - 2.4 GHz DSS Cordless Speakerphone

Brands by name

Popular brands

Panasonic KX-TG2670N - 2.4 GHz DSS Cordless Speakerphone, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2670N - 2.4 GHz DSS Cordless Speakerphone

Reviews:

Related manuals for KX-TG2670N - 2.4 GHz DSS Cordless Speakerphone

Brands by name

Popular brands