18
Preparing the Answering System
To erase the recorded greeting message
Press
(GREETING/EDIT)
briefly
\
press
(ERASE/CLEAR)
while the
message is being played.
•
The unit will answer a call with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a greeting message (p. 17), one of two messages will
be played when a call is received, depending on the caller’s recording
time (p. 22).
To check the pre-recorded greeting
, press
(GREETING/EDIT)
briefly.
•
A pre-recorded greeting will be played as follows:
■
When the recording time is set to “1 minute” or “3 minutes”:
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
■
When the recording time is set to “Greeting only”:
“Hello, we are not available now. Please call again. Thank you for your call.”
Flash Memory Message Backup
Messages are stored on a “flash memory” IC chip and will not be
affected by power failures. All messages are saved until you erase
them.
Greeting message sample
“Hello, this is (your name and/or number). Sorry I cannot take your
call. Please leave a message after the beep. Thank you.”
To adjust the speaker volume:
9 levels (0–8) are available while using the
answering system. To increase, press
(Ä)
.
To decrease, press
(Å)
.
Loud
Low
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
High
Ex. Level 8
Summary of Contents for KX-TG2583ALB
Page 87: ...87 ...
