Panasonic KX-TG2583 Operating Instructions Manual Download Page 72

Page: 72 / 84

If the Following Appear...

If the unit detects a problem, one of the following messages will be
displayed on the handset or the base unit.

Handset display

Recharge battery

No link to base.
Place on cradle
and try again.

Please lift up
and try again

Not available

Save error

The battery needs to be charged. Place the
handset on the base unit to charge the battery
(p. 11).

The handset has lost communication with the
base unit. Place the handset on the base unit
and try again.

BACK

FWD/EDIT

was pressed

with the handset while the handset was on the
base unit. Lift the handset and press the button
again.

When trying to store an item or Caller List
information in the directory, the directory
memory is full (p. 38, 44). To erase other stored
items from the directory, see page 51.

While the base unit was not in the standby mode,

was pressed to search the Caller

List/directory list,

FWD/EDIT

was pressed to

select an option, or

(INTERCOM/CLEAR)

(FLASH/CALL!WAIT/PLAYBACK)

was pressed.

While storing items in the directory, the handset
has lost communication with the base unit.
Move closer to the base unit and try again.

Directory full

Summary of Contents for KX-TG2583





















































































Search results

Summary of Contents for KX-TG2583

Reviews:

Brands by name

Popular brands

Panasonic KX-TG2583, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2583

Reviews:

Brands by name

Popular brands