background image

Useful Information

For assistance, please call 1-800-211-PANA (7262).

67

Warranty

Panasonic Telephone Limited Warranty

Limited Warranty Coverage

If your telephone (identified in your Operating Instructions) does not work properly 
because of a defect in materials or workmanship, Panasonic Consumer Electronics 
Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) 
will, for the length of the period indicated on the chart below, which starts with the 
date of original purchase (“Limited Warranty period”), at its option either (a) repair 
your product with new or refurbished parts, or (b) replace it with a new or a 
refurbished product. The decision to repair or replace will be made by the 
warrantor.
  

 

Parts 

 

  Labor

  

 

One (1) Year

 

 

One (1) Year

During the “Labor” Limited Warranty period there will be no charge for labor. During 
the “Parts” Limited Warranty period, there will be no charge for parts. You must 
mail-in your product during the Limited Warranty period. This Limited Warranty 
excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). 
This Limited Warranty only applies to products purchased and serviced in the 
United States or Puerto Rico. This Limited Warranty is extended only to the original 
purchaser and only covers products purchased as new. A purchase receipt or other 
proof of the original purchase date is required for warranty service.

To obtain service in the USA please contact:

Panasonic Services Company, Panasonic Plus Department
20421 84th Avenue South
Kent, WA 98032
Tel: 1-800-833-9626     Fax: 1-800-237-9080

For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or 
fax (787)-768-2910. 
For Limited Warranty service for headsets if a headset is included with this product 
please call Panasonic Plus Department at 1-800-833-9626.

When shipping the unit carefully pack, include all accessories, and send it prepaid, 
adequately insured and preferably in the original carton. Include a letter detailing 
the complaint, a return address and a day time phone number where you can be 
reached.

PANASONIC CONSUMER 
ELECTRONICS COMPANY, DIVISION 
OF PANASONIC CORPORATION OF 
NORTH AMERICA 
One Panasonic Way, 
Secaucus, New Jersey 07094

PANASONIC PUERTO RICO, INC.
San Gabriel Industrial Park, 
Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985

TG2431_2432(e).book  Page 67  Thursday, February 3, 2005  5:01 PM

Summary of Contents for KX-TG2431.









































































Reviews: