Panasonic KX-TG242SK, Operating Instructions Manual

Page: 13 / 56

Making calls
Using the base unit
1
Dial the phone number.
R To correct a digit, press M CLEAR N .
2
Lift the corded handset.
3
When you finish talking, place the corded
handset on the cradle.
Note:
R You can also dial the phone number after lifting
the corded handset.
Using the speakerphone
1
During a conversation on the corded handset,
press
M SP-PHONE N to turn on the
speakerphone.
R You can place the corded handset on the
cradle.
R Speak into the base unit microphone.
R Speak alternately with the other party.
2
When you finish talking, press M SP-PHONE N .
Note:
R For best performance, use the speakerphone in
a quiet environment.
R To switch to the receiver, lift the corded handset.
Making a call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
M REDIAL N
2
MbN : Select the desired phone number.
3
Lift the corded handset.
Erasing a number in the redial list
1
M REDIAL N
2
MbN : Select the desired phone number. a
M ERASE N
3
MbN : “
Yes
” a M SELECT N
4
M EXIT N
Using the handset
1
Lift the handset and dial the phone number.
R To correct a digit, press M CLEAR N .
2
Press M N or M CALL N .
3
When you finish talking, press M OFF N or place
the handset on the charger.
Using the speakerphone
1
Dial the phone number and press M N .
R Speak alternately with the other party.
2
When you finish talking, press M OFF N .
Note:
R For best performance, use the speakerphone in
a quiet environment.
R To switch back to the receiver, press
M N / M N .
Making a call using the redial list
The last 5 phone numbers dialed are stored in the
redial list (each 48 digits max.).
1
M REDIAL N or MEN REDIAL
R If there is a new message in the voice mail
or answering system,
M REDIAL N is not
displayed.
2
MbN : Select the desired phone number.
3
M N
Erasing a number in the redial list
1
M REDIAL N or MEN REDIAL
2
MbN : Select the desired phone number. a
M ERASE N
3
MbN : “
Yes
” a M SELECT N
4
M OFF N
Adjusting the receiver or speaker
volume
Base unit
Press MDN or MCN repeatedly while talking.
Handset
Press MjN or MkN repeatedly while talking.
Note for handset:
R There are 5 volume levels (1 to 5) for the
receiver. When you change the receiver volume
to level 5 (maximum level), the volume returns
to level 4 (default) after you hang up.
For assistance, please visit http://www.panasonic.com/help 13
Making/Answering Calls
TG477x(en-en)_1130_ver021.pdf 13 2011/11/30 15:57:54