manualshive.com logo in svg

Panasonic KX-TG2420, Operating Instructions Manual, Page: 9 / 56

Share
Download
Panasonic KX-TG2420 Operating Instructions Manual Download Page 9

Preparation

For assistance, please call 1-800-211-PANA (7262).

9

Connections

Note:

L

Use only the included Panasonic AC adaptor PQLV19.

L

The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel 
warm during use.)

L

The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. 
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the 
adaptor may cause it to become disconnected.

L

The unit will not work during a power failure. We recommend connecting a standard 
telephone to the same telephone line or to the same telephone jack using the Panasonic 
KX-J66 T-adaptor. Emergency power can be supplied to the unit by connecting a 
Panasonic battery back-up power supply noted on page 5.

To single-line telephone jack (RJ11C)

Telephone line cord

To power outlet (120 V AC, 60 Hz)

AC adaptor

Raise the 
antenna.

Fasten the AC adaptor cord.

Hooks

TG2420(e).book  Page 9  Thursday, December 16, 2004  11:11 AM

Summary of Contents for KX-TG2420

























































Reviews:

No comments