background image

Usef

ul Inform

ation

For assistance, please call: 1-800-211-PANA(7262)

51

Wall Mounting

This unit can be mounted on a wall phone plate.

1

Push the hook and turn it 
upward. Turn the hook until a 
click is heard.

2

Press the tabs in the direction 
of the arrows (

1

), then remove 

the wall mounting adaptor (

2

). 

3

Connect the AC adaptor. Tuck 
the telephone line cord inside 
the wall mounting adaptor, then 
push the adaptor in the direction 
of the arrows (

1

 and 

2

).

• The word “UP WALL” should face 

upward.

• Fasten the AC adaptor cord to 

prevent it from being disconnected.

4

Connect the telephone line cord. 
Mount the unit, then slide it 
down.

• Raise the antenna.

5

To charge the handset battery:

Rest the handset on the 

charge contacts (

1

), then 

push the top of the handset so 

the hook snaps into the slot at 

the top of the handset (

2

).

• The unit beeps once and the 

CHARGE indicator lights.

2

1

1

1

2

2

To Power 

Outlet

Hook

2

1

Hook

Slot

OR

PQQX13985YA.book  51 ページ  2004年1月22日 木曜日 午後5時8分

Summary of Contents for KX-TG2335S





































































Reviews: