Special Features
For assistance, please call: 1-800-211-PANA(7262)
49
Ad
v
anced Operation
Key Tone
You can select whether or not the handset keys will sound tones (key tone,
confirmation tone, error tone). The factory preset is ON.
Re-registering the Handset
If “
No link to base. Move closer to base, try again.
” is displayed
even when using the handset near the base unit, the handset may have lost
communication with the base unit. You need to re-register the handset to the base
unit.
•
Have both the handset and base unit nearby during registration.
•
Follow steps 1 and 2 listed below. You have about 1 minute to complete
them.
• If the handset beeps 3 times and “
Error!!
” is displayed, an error occurred. Try
again from step 1.
• You can stop registration by pressing
[OFF]
on the handset, and pressing
[LOCATOR/INTERCOM]
on the base unit.
1
Press
[MENU]
.
2
Scroll to “
Initial setting
” by pressing
[
d
]
or
[
B
]
, then press
Select
.
3
Scroll to “
Key tone
” by pressing
[
d
]
or
[
B
]
,
then press
Select
.
4
Select “
Off
” or “
On
” by pressing
[
d
]
or
[
B
]
.
5
Press
Save
, then press
[OFF]
.
1
Base unit:
Press and hold
[LOCATOR/INTERCOM]
until a beep sounds.
• The CHARGE indicator flashes.
2
Handset:
Press and hold
[FLASH/CALL WAIT]
until
“
Handset Registering
” is
displayed.
• When registration is complete, a beep sounds
from the handset.
•
Wait for 20 seconds after registration is
complete while the handset establishes
communication with the base unit.
Handset
Initial setting
Back
Select
K
d
B
L
Key tone
Back
Select
K
d
B
L
Key tone
:On
Back
Save
K
d
B
L
Handset & Base Unit
Handset
Registering
Handset [1]
Registered
PQQX13985YA.book 49 ページ 2004年1月22日 木曜日 午後5時8分