8
Settings
Connections
• USE ONLY WITH Panasonic AC ADAPTOR PQLV19 (Order No. PQLV19Z).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
• The unit will not work during a power failure. To connect a standard telephone on
the same line, use the Panasonic T-adaptor KX-J66.
Installing the Battery in the Handset
Insert the battery (
), and press it down until it snaps into the compartment (
).
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as indicated
by the arrow. Replace the old battery with a new one (p. 9).
Close the cover and charge the battery for about 6 hours.
Battery Charge
Place the handset on the base unit and charge
for about
6 hours
before initial use.
• The CHARGE indicator lights and the unit
beeps once.
• It is normal for the back on the handset to feel
warm during battery charge.
Fasten the AC adaptor
cord.
Hook
Single-Line Telephone Jack (RJ11C)
Telephone Line Cord
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
1
2
1
2
+
+
+
OR
CHARGE
Indicator
✿✤✦✩✫✩✿✮❃ ✫