– 7 –
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. When you purchase an
additional handset, refer to the additional handset’s installation manual for
registration. If for some reason the handset is not registered to the base unit, register
the handset.
1
{j
/OK
}
2
{^}
/
{V}
:
“
Handset Setup
”
i
{
>
}
3
{^}
/
{V}
:
“
Registration
”
i
{
>
}
4
{^}
/
{V}
:
“
Register H.set
”
i
{
>
}
5
Press and hold
{x}
on the base unit for about
5 seconds, until the registration tone sounds.
6
Wait until
“
Enter Base PIN
”
is displayed.
i
Enter the base unit PIN (default:
“
0000
”
).
i
{j
/OK
}
Optional service (Caller ID)
If you subscribe to Caller ID service, you can:
– display caller information
Support information
Customer Support Centre Tel. No.: 132600 or website www.paansonic.com.au
{j
/OK
}
{x}
{j
/OK
}
012345
TG1855_1857AL(e)_QG.fm Page 7 Tuesday, June 26, 2007 6:02 PM
