Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R
When paging unit(s), the paged unit(s) beeps
for 1 minute.
R
If you receive an outside call while talking on the
intercom, the interrupt tone sounds.
–
Handset:
To finish intercom, press
M
OFF
N
.
To answer the call, press
M
N
.
–
Base unit:
To finish intercom, place the
corded handset on the cradle. If the
speakerphone is used, press
MZN
. To answer
the call, lift the corded handset. If the
speakerphone is used, press
MZN
.
Note for handset:
R
To change the ringer volume and ringer tone for
intercom, see page 38.
Making an intercom call
Handset
1
M
MENU
N
a
MbN
:
“
Intercom
”
a
M
SELECT
N
2
MbN
: Select the desired unit or
“
Voice
paging
”
.
a
M
SELECT
N
R
If you select
“
Voice paging
”
, speak into
the microphone after the beep. Your voice
will be heard using the speakers of the base
unit and all handsets, until a paged party
answers your page or until you press
M
OFF
N
.
After the other party answers, the
speakerphone mode is turned on.
3
When you finish talking, press
M
OFF
N
.
Note:
R
You can also use the
M
INTERCOM
N
soft key, if
displayed, to make intercom calls.
R
You cannot use voice paging if other units are in
use.
Base unit
1
Press
M
INTERCOM
N
.
When 2 or more handsets are registered:
MbN
: Select the desired unit.
a
M
SELECT
N
R
To page all handsets, press
0
or wait for a
few seconds.
R
Lift the corded handset if needed.
2
When you finish talking, press
MZN
or place
the corded handset on the cradle.
Answering an intercom call
Handset
1
Press
M
N
to answer the page.
2
When you finish talking, press
M
OFF
N
.
Base unit
1
Press
MZN
or lift the corded handset to answer
the page.
2
When you finish talking, press
MZN
or place
the corded handset on the cradle.
Turning auto intercom on/off
This feature allows the handset and base unit to
answer intercom calls automatically when it is
called. You do not need to press
M
N
, lift the
corded handset, or press
MZN
. When this feature
is set to
“
On
”
, the monitoring handset or base unit
for the baby monitor feature (page 45) will also
answer baby monitor calls automatically. The
default setting is
“
Off
”
.
Handset / Base unit
1
M
MENU
N#273
2
MbN
: Select the desired setting.
a
M
SAVE
N
3
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Note:
R
This feature is not available for all handsets
paging and voice paging even if it is turned on.
For assistance, please visit http://shop.panasonic.com/support
23
Intercom
