35
KX-TG1711MEB/KX-TG1712MEB/KX-TGA171MEB
11.1.2.2. Batch file Setting
Note:
• “*****” varies depending on the country.
11.1.2.3. Commands
See the table below for frequently used commands.
Command name
Function
Example
readid
Read ID (RFPI)
Type “readid”, and the registered ID is read out.
writeid
Write ID (RFPI)
Type “writeid 00 18 E0 0E 98”, and the ID “0018 E0 0E 98” is written.
setfreq
adjust Frequency of RFIC
Type “setfreq nn nn”.
hookoff
off-hook mode on Base
Type “hookoff”.
hookon
on-hook mode on Base
Type “hookon”.
Getchk
Read checksum
Type “getchk”.
1.
Insert the Batch file CD-ROM into CD-ROM drive and
copy PNZZTG***** folder to your PC (example: D drive).
2.
Open a window of MS-DOS mode.
3.
At the DOS prompt, type "
D:
" (for example) to select the
drive, then press the
Enter
key.
4.
Type "
CD
㪳
PNZZTG*****
", then press the
Enter
key.
5.
Type "
CTE open com X
", then press the
Enter
key
(
X
: COM port number used for the serial connection on your PC).
6.
Type "
READID
", then press the
Enter
key.
䊶
If any error messages appear, change the port number or
䇭
check the cable connection.
䊶
If any value appear, go to next step.
7.
Type "
DOSKEY
", then press the
Enter
key.
<Example: correct setting>
C:
>
Documents and Settings>D:
D:
>
>CD
>
PNZZTG*****
D:
>
PNZZTG***** >CTE open com X
D:
>
PNZZTG*****>READID
00 52 4F A8 A8
D:
>
PNZZTG*****>DOSKEY
D:
>
PNZZTG*****>
<Example: incorrect setting>
C:
>
Documents and Settings>D:
D:
>
>CD
>
PNZZTG*****
D:
>
PNZZTG***** >CTE open com X
D:
>
PNZZTG*****>READID
ReadID
ReadIPUI Error: read access failed
D:
>
PNZZTG*****>
<Example for Windows>
On your computer, click
[Start]
, select
Programs
(
All Programs
for Windows XP/Windows Server 2003),
then click
MS-DOS Prompt
. (for Windows 95/Windows 98)
Or
Accessories-MS-DOS Prompt
. (for Windows Me)
Or
Command Prompt
. (for Windows NT 4.0)
Or
Accessories-Command Prompt
.
(for Windows 2000/Windows XP/Windows Server 2003)
